Search by Company
- Search by Category
- Search by Company
- Search by specifying conditions
MITSUBISHI ELECTRIC CORPORATIONReturn to List
CC-Link IE TSN｜Master｜PLC
MELSEC iQ-R Series CC-Link IE TSN Plus Master/Local Module RJ71GN11-EIP
Network management module maximizes CC-Link IE TSN performance and functionality
MELSEC iQ-R Series Safety CPU R□□SFCPU-SET
Safety CPU can execute both safety and generic programs
MELSEC iQ-R series CC-Link IE TSN Motion module RD78G
These Motion modules with multiple-core processors enable to configure a high-speed, large system by supporting the CC-Link IE TSN real-time open network.
MELSEC iQ-F Series CC-Link IE TSN Master/Local Module FX5-CCLGN-MS
FX5-CCLGN-MS is an intelligent function module. It can connect MELSEC iQ-F series FX5 CPU modules on CC-Link IE TSN Network as an master or local station.
MELSEC iQ-R series CC-Link IE TSN Motion module RD78GH
These Motion modules with multiple-core processors enable to configure a high-speed, large system by supporting the CC-Link IE TSN real-time open network.
MELSEC iQ-R Series CC-Link IE TSN Master/Local Module RJ71GN11-T2
Network management module maximizes CC-Link IE TSN performance and functionality
MELSEC iQ-F series CC-Link IE TSN Motion module FX5-40SSC-G/FX5-80SSC-G
The Motion module enables advanced motion control while offering cost-effectiveness.
The module has the capability and functions required for stand-alone/small-scale systems.
Connects industry-leading servo amplifiers MELSERVO-J5 series via CC-Link IE TSN.
CC-Link IE TSN｜Master｜PC・others
Motion Control Software SWM-G
Installed on a personal computer, SWM-G Motion Control Software can perform motion and network control.
SWM-G Motion Control Software is available in 16 to 128-axis control models, enabling multi-axis synchronization of various scales of machines.
CC-Link IE TSN｜Master｜Products built into devices
Master station communication LSI CP610 NZ2GACP610-60
Dedicated communication LSI (CP610) 60 pieces
CC-Link IE TSN｜Device｜Digital I/O
CC-Link IE TSN Waterproof/Dustproof Remote I/O Module (With Safety Functions) NZ2GNS12A2-□
I/O combined module with safety functions.Compliant with international safety standards, ISO 13849-1 Category 4 PL e and IEC 61508 SIL 3 (NZ2GNS12A2-14DT complies with Category 3).
Waterproof/dustproof Type (IP67) Remote I/O Module NZ2GN12A□-16□
Block type remote I/O modules for CC-Link IE TSN. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Modules Screw Terminal Block Type 16 points NZ2GN2B1-16□
Block type remote I/O modules for CC-Link IE TSN. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Module Spring Clamp Terminal Block Type 16 points NZ2GN2S1-16□
Block type remote I/O modules for CC-Link IE TSN. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Safety Remote I/O Modules Spring-clamp Terminal Block Type NZ2GNSS2-□
Block type safety remote I/O modules for CC-Link IE TSN. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Modules 40-pin Connector Type NZ2GNCF1-32□
Block type remote I/O modules for CC-Link IE TSN. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Modules Sensor Connector (e-CON) Type NZ2GNCE3-32□
Block type remote I/O modules for CC-Link IE TSN. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Modules Screw Terminal Block Type NZ2GN2B1-32□
Block type remote I/O modules for CC-Link IE TSN Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Module Spring Clamp Terminal Block Type NZ2GN2S1-32□
Block type remote I/O modules for CC-Link IE TSN Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
CC-Link IE TSN｜Device｜Analog I/O
Analog Output Module Screw Terminal Block Type NZ2GN2B-60DA4
Block type remote I/O modules for CC-Link IE TSN Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Analog Output Module Spring Clamp Terminal Block Type NZ2GN2S-60DA4
Block type remote I/O modules for CC-Link IE TSN Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Analog Input Module Screw Terminal Block Type NZ2GN2B-60AD4
Block type remote I/O modules for CC-Link IE TSN Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Analog Input Module Spring Clamp Terminal Block Type NZ2GN2S‐60AD4
Block type remote I/O modules for CC-Link IE TSN Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
CC-Link IE TSN｜Device｜HMI
GOT2000 Series CC-Link IE TSN Communication Unit GT25-J71GN13-T2
GOT now supports the CC-Link IE TSN.
CC-Link IE TSN｜Device｜Gateway
CC-Link IE TSN－AnyWireASLINK Bridge Module NZ2AW1GNAL
AnyWireASLINK products can be seamlessly integrated to CC-Link IE TSN.
CC-Link IE TSN｜Device｜Inverter・Servo systems
CC-Link IE TSN-compatible 1/2/3-axis drive unit MR-J5D-G4
Converter separate type drive units available in 1/2/3-axis types
MITSUBISHI Inverter FR-E800-SCE(safety communication model)
World's smallest class inverter
FR-E800-SCE is compatible with CC-Link IE TSN(100Mbps) as standard.
MITSUBISHI Inverter FR-E800-E(Ethernet model)
World's smallest class inverter
FR-E800-E is compatible with CC-Link IE TSN(100Mbps) as standard.
CC-Link IE TSN-compatible 1-axis servo amplifier with special specifications MR-J5-G-RJ
Supports four-wire type fully closed loop control and A/B/Z-phase input with a load-side encoder
MITSUBISHI Inverter FR-F800 Series(FR-A8NCG)
Enhanced Next-Generation Energy-Saving Inverter
(For CC-Link IE TSN network, the option FR-A8NCG is required.)
CC-Link IE TSN-compatible 3-axis servo amplifier MR-J5W3-G
Drives a maximum of three servo motors
MITSUBISHI Inverter FR-A800 Series(FR-A8NCG)
High performance and high quality new inverter of the highest level
(For CC-Link IE TSN network, the option FR-A8NCG is required.)
CC-Link IE TSN-compatible 2-axis servo amplifier MR-J5W2-G
Drives a maximum of two servo motors
The inverter with a built-in CC-Link IE TSN communication function FR-A800-GN
FR-A800-GN is compatible with CC-Link IE TSN as standard.
CC-Link IE TSN｜Device｜Robot
MITSUBISHI ELECTRIC INDUSTRIAL ROBOT FR Series CR800-R Controller
MELSEC iQ-R Series integration type industrial robot.
CC-Link IE TSN Safety Communication Network Function is supported.
CC-Link IE TSN｜Device｜Products built into devices
Remote station communication LSI CP620 NZ2GACP620-60/NZ2GACP620-300
NZ2GACP620-60: Communication LSI embedded with GbE-PHY (CP620) 60 pieces
NZ2GACP620-300: Communication LSI embedded with GbE-PHY (CP620) 300 pieces
CC-Link IE TSN｜Peripheral devices｜Tool
CC-Link IE TSN communication software for Windows® SW1DND-CCIETCT-M
Computer-based CC-Link IE TSN data collection software
CC-Link IE TSN｜Peripheral devices｜Switch
Managed Ethernet switch NZ2MHG-TSNT□
Star topology can be configured with a managed Ethernet switch.
NZ2MHG-TSNT4 is equipped with 4 Ethernet ports and NZ2MHG-TSNT8F2 is equipped with 8 Ethernet ports
CC-Link IE Control｜Management station｜PLC
MELSEC iQ-R Series CC-Link IE Control Network Module with External Power Supply RJ71GP21S-SX
These modules can be used either as a CC-Link IE Control Network control or normal station.
MELSEC iQ-R Series CC-Link IE Embedded CPU Module R□ENCPU
MELSEC iQ-R Series CPU module with CC-Link IE embedded
Multi-network Supporting Ethernet Module RJ71EN71
Supported by Ethernet, CC-Link IE Field Network, or CC-Link IE Control Network.
MELSEC iQ-R Series CC-Link IE Control Network Module RJ71GP21-SX
These modules can be used either as a CC-Link IE Control Network control or normal station.
MELSEC-Q Series CC-Link IE Controller Network Module with External Power Source Function QJ71GP21S-SX
A high-speed, large-capacity network is achieved on your production site.
MELSEC-Q Series CC-Link IE Control Network Module QJ71GP21-SX
A high-speed, large-capacity network is achieved on your production site.
CC-Link IE Control｜Management station｜PC・others
CC-Link IE Control Network Interface Board Q81BD-J71GP21-SX/Q81BD-J71GP21S-SX
The CC-Link IE Control Network board allows connection of a personal computer to a CC-Link IE Control Network, realizing high-speed and large-volume data communications between the computer and programmable controllers.
CC-Link IE Control Network Interface Board Q80BD-J71GP21-SX/Q80BD-J71GP21S-SX
The CC-Link IE Control network board allows connection of a personal computer to a CC-Link IE Control network system.
CC-Link IE Control｜Normal station｜HMI
GT15-J71GP23-SX CC-Link IE Controller Network Communication Module for GOT1000
The communication module can be used in CC-Link IE controller networks that support a transmission speed of 1 Gbps and a large-capacity of 256 Kbytes for network type shared memory. Utilize the communication module across the system including data systems and production sites.
CC-Link IE Control｜Peripheral devices(optical fiber cable)｜Peripheral software
GX Works2 SW1DNC-GXW2-E
Programmable Controller Engineering Software
The Next Generation in Industrial Programming
CC-Link IE Control Network Object Development
The CC-Link IE development tool with object software supports the development of CC-Link IE control compatible network products.
CC-Link IE Field｜Master｜PLC
MELSEC iQ-R series CC-Link IE Field Network Simple Motion Module RD77GF
With the single network, various field devices such as servo amplifiers, I/O modules, and high-speed counter modules are connected with no restriction enabling advanced Motion control.
MELSEC iQ-R Series CC-Link IE Embedded CPU Module R□ENCPU
CPU module with CC-Link IE embedded
MELSEC iQ-R Series Multi-network Supporting Ethernet Module RJ71EN71
The network module supports Ethernet, CC-Link IE Field Network, and CC-Link IE Control Network.
MELSEC iQ-R Series CC-Link IE Field Network Master/Local Module RJ71GF11-T2
These modules can be used either as a CC-Link IE Field Network master or local station.
MELSEC-Q series CC-Link IE Field Network Simple Motion Module QD77GF16
The QD77GF16 Simple Motion module combines the versatility of Ethernet and highly accurate synchronous operation for Motion control.
MELSEC-QS Series CC-Link IE Field Network Master/Local Module QS0J71GF11-T2
This module is for connecting safety PLCs to the CC-Link IE Field network.
MELSEC-L Series CC-Link IE Field Network Master/Local Module LJ71GF11-T2
These modules can be used either as a CC-Link IE Field Network master or local station.
MELSEC-Q Series CC-Link IE Field Network Master/Local Module QJ71GF11-T2
High-speed and large-capacity data communication is available between a master station and slave stations on the CC-Link IE Field network.
CC-Link IE Field｜Master｜PC・others
CC-Link IE Field Network Simple Motion Board MR-EM340GF
Motion control on PC Environment with CC-Link IE Field Network
CC-Link IE Field Network Interface Board Q80BD-J71GF11-T2/Q81BD-J71GF11-T2
CC-Link IE Field Network interface board allows the connection of a personal computer to CC-Link IE Field Network.
CC-Link IE Field｜Master｜Products built into devices
Source Code SW1DNC-EFI210SRC Development Master Station Communication LSI CP210
The source code and the dedicated communication LSI CP210 allow you to develop a CC-Link IE Field Network master station without concern about protocol.
CC-Link IE Field｜Device｜PLC
MELSEC iQ-R Series CC-Link IE Field Network Remote Head Module RJ72GF15-T2
A remote station can be realized through a combination of MELSEC iQ-R Series I/O and intelligent function modules used together with this module.
MELSEC iQ-F Series CC-Link IE Field Network Intelligent device station module FX5-CCLIEF
FX5-CCLIEF is an intelligent function module. It can connect MELSEC iQ-F series FX5 CPU modules on CC-Link IE Field Network as an intelligent device station.
MELSEC-L Series CC-Link IE Field Network Head Module LJ72GF15-T2
A remote station can be realized through a combination of MELSEC-L Series I/O and intelligent function modules used together with this module.
CC-Link IE Field｜Device｜Digital I/O
Waterproof/dustproof Type (IP67) Remote I/O Module NZ2GN12A□-16□
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Modules Screw Terminal Block Type 16 points NZ2GN2B1-16□
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Module Spring Clamp Terminal Block Type 16 points NZ2GN2S1-16□
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Waterproof/dustproof type (IP67) safety I/O modules NZ2GFS12A2-14DT/16DTE
Waterproof/dustproof type (IP67) safety I/O modules
Remote Input Module With Safety Functions NZ2GFSS2-32D
I/O module with safety functions
Waterproof/Dustproof Type (IP67) Remote Modules NZ2GF12A□-□
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Modules 40-pin Connector Type NZ2GFCF□-□
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Modules Spring-clamp Terminal Block Type NZ2GF2S□-□
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Modules MIL Connector Type NZ2GFCM□-□
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Module Sensor Connector (e-CON) Type NZ2GFCE□-□
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Remote I/O Modules Screw Terminal Block Type NZ2GF2B□-□
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
CC-Link IE Field｜Device｜Analog I/O
Analog Output Modules Sensor Connector (e-CON) Type NZ2GFCE-60DAV8/NZ2GFCE-60DAI8
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Analog Input Modules Sensor Connector (e-CON) Type NZ2GFCE-60ADV8/NZ2GFCE-60ADI8
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Multiple Input (voltage/current/temperature) Module NZ2GF2S-60MD4
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Temperature Control Module NZ2GF2B-60TCTT4/NZ2GF2B-60TCRT4
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
Analog Module Screw Terminal Block Type NZ2GF2BN-60AD4/NZ2GF2BN-60DA4
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
CC-Link IE Field｜Device｜HMI
GOT1000 Series CC-Link IE Field Network Communication Unit GT15-J71GF13-T2
GOT now supports the CC-Link IE Field Network.
CC-Link IE Field｜Device｜Gateway
CC-Link IE Field Network - Anywire ASLINK Bridge Module NZ2AW1GFAL
Seamlessly connects AnyWireASLINK products to CC-Link IE Field Network.
CC-Link IE Field Network - CC-Link Bridge Module NZ2GF-CCB
Connects CC-Link Version 1 Remote I/O stations and Remote device stations to CC-Link IE Field Network.
Ethernet Adapter Module NZ2GF-ETB
Connects Seamless Message Protocol (SLMP) compatible Ethernet devices to CC-Link IE Field Network.
CC-Link IE Field｜Device｜Inverter・Servo systems
MELSERVO-J4 Series CC-Link IE Field Network Servo Amplifier with Motion MR-J4-B-RJ010
MR-J4 series servo amplifier is compatible with the synchronous communication function, enabling advanced Motion control with the CC-Link IE Field Network,
MITSUBISHI Inverter FR-A700 Series
(For CC-Link IE Field Network, the option FR-A7NCE is required.)
Advanced functionality and high-performance inverter
CC-Link IE field network compatible built-in option FR-A7NCE for general-purpose inverter FREQROL-A700 series
Easy connection with slot insertion!
Control inverters easily and seamlessly using super fast CC-Link IE field network!
MITSUBISHI Inverter FR-F700P Seriese(FR-A7NCE)
Energy-saving premium inverter for fans and pumps
(For CC-Link IE Field Network, the option FR-A7NCE is required.)
MITSUBISHI Inverter FR-A700 Series(FR-A7NCE)
Advanced functionality and high-performance inverter
(For CC-Link IE Field Network, the option FR-A7NCE is required.)
MITSUBISHI Inverter FR-A800 Series(FR-A8NCE)
High performance and high quality new inverter of the highest leve
(For CC-Link IE Field Network, the option FR-A8NCE is required.)
CC-Link IE Field｜Device｜Products built into devices
Intelligent Device Station/Remote Device Station Communication LSI CP220
The dedicated communication LSI CP220 allows you to develop CC-Link IE Field Network products without concern about protocol.
CC-Link IE Field｜Device｜Miscellaneous
High-Speed Counter Module NZ2GFCF-D62PD2
Block type remote I/O modules for CC-Link IE Field Network. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.
CC-Link IE Field｜Peripheral devices｜Switch
Managed Ethernet switch NZ2MHG-TSNT□
Star topology can be configured with a managed Ethernet switch.
NZ2MHG-TSNT4 is equipped with 4 Ethernet ports and NZ2MHG-TSNT8F2 is equipped with 8 Ethernet ports
Industrial Switching HUB NZ2EHG-T8N
NZ2EHG-T8 is a compact-sized industrial switching HUB unit that is compliant with the IEEE802.3ab (1000BASE-T)/IEEE802.3u (100BASE-TX)/IEEE802.3 (10BASE-T) standards.
Industrial Managed Switch NZ2MHG-T8F2
The managed CC-Link IE switch can configure a system on multiple networks by Ethernet VLAN function, supporting the transmission speed of 10 Mbps/100 Mbps/1 Gbps.
CC-Link IE Field Basic｜Master｜PLC
MELSEC iQ-F Series Ethernet Module FX5-ENET
FX5-ENET is an intelligent function module for connecting to a CC-Link IE Field network Basic and general-purpose Ethernet.
MELSEC iQ-F Series CPU Module FX5UJ
FX5UJ with excellent cost performance that can be used in any scene
MELSEC iQ-F Series CPU Module FX5U(C)
Flagship model equipped with advanced built-in functions and diverse expandability
MELSEC-L Series Programmable Controller CPU Module L□□CPU(-P/-BT/-PBT)
Products with CC-Link IE Field Network Basic embedded.
MELSEC-Q Series Universal Model High-speed Type CPU Q□UDVCPU
Products with CC-Link IE Field Network Basic embedded.
MELSEC iQ-R Series Programmable Controller CPU Module R□CPU, R□ENCPU
Products with CC-Link IE Field Network Basic embedded.
CC-Link IE Field Basic｜Master｜PC・others
MELIPC MI5000 Series MI5122-VW
Products with CC-Link IE Field Network Basic embedded.
CC-Link IE Field Basic｜Remote｜Digital I/O
Remote I/O Module Spring Clamp Terminal Block Type 16 points NZ2MF2S2-16A/NZ2MF2S2-16R
CC-Link IE Field Network Basic slave station. These modules are useful when installation positions close to I/O
devices are required.
Remote I/O Module Spring Clamp Terminal Block Type NZ2MF2S1-32□
CC-Link IE Field Network Basic slave station. These modules are useful when installation positions close to I/O
devices are required.
Remote I/O Modules Screw Terminal Block Type NZ2MFB□-□
CC-Link IE Field Network Basic slave station. These modules are useful when installation positions close to I/O
devices are required.
CC-Link IE Field Basic｜Remote｜HMI
GOT2000 Series GT2505 model
GOTとは、Graphic Operation Terminal（グラフィック オペレーション ターミナル）の略です。
従来、操作盤に取り付けていたハードウェア的なスイッチ、ランプなどをソフトウェアにより実現し、モニタ画面上でこれらの表示・操作が可能なタッチパネル付の表示器です。
CC-Link IE Field Basic｜Remote｜Sensor・Encoder
Vision Sensor VS70 VS70M-□□□
Connectable to the programmable controller without a network interface module via CC-Link IE Field Network Basic interface function.
CC-Link IE Field Basic｜Remote｜Inverter・Servo systems
The inverter with a built-in Ethernet communication function FR-E700-NE
FR-E700-NE is compatible with CC-Link IE Field Network Basic as standard.
The inverter with a built-in Ethernet communication function FR-F800-E
FR-F800-E is compatible with CC-Link IE Field Network Basic as standard.
The inverter with a built-in Ethernet communication function FR-A800-E
FR-A800-E is compatible with CC-Link IE Field Network Basic as standard.
CC-Link IE Field Basic｜Remote｜Robot
MITSUBISHI ELECTRIC INDUSTRIAL ROBOT FR Series CR800-Q
Armed for productivity.
MITSUBISHI MELFA industrial robot fits for cell manufacturing with high speed and high precision performance and combining intelligent technology,
It has easy connectivity with Mitsubishi's PLCs and FA equipments.
MITSUBISHI ELECTRIC INDUSTRIAL ROBOT FR Series CR800-R
Armed for productivity.
MITSUBISHI MELFA industrial robot fits for cell manufacturing with high speed and high precision performance and combining intelligent technology,
It has easy connectivity with Mitsubishi's PLCs and FA equipments.
MITSUBISHI ELECTRIC INDUSTRIAL ROBOT FR Series CR800-D
Armed for productivity.
MITSUBISHI MELFA industrial robot fits for cell manufacturing with high speed and high precision performance and combining intelligent technology,
It has easy connectivity with Mitsubishi's PLCs and FA equipments.
CC-Link IE Field Basic｜Remote｜Power reception and distribution device
Energy Measuring Unit EcoMonitorLight(Model:EMU4-BD1A-MB/EMU4-HD1A-MB)
Simple & Easier. Providing Energy Visualization.
(For CC-Link IE Field Network Basic communication, the option CC-Link IE Field Network Basic Communication Unit (Model:EMU4-CM-CIFB) is required.)
Energy Measuring Unit EcoMonitorLight
(Model:EMU4-BD1-MB/EMU4-HD1-MB/EMU4-FD1-MB)
Simple & Easier. Providing Energy Visualization.
(For CC-Link IE Field Network Basic communication, the option CC-Link IE Field Network Basic Communication Unit (Model:EMU4-CM-CIFB) is required.)
Energy Measuring Unit EcoMonitorPlus
(Model:EMU4-BM1-MB/EMU4-HM1-MB/EMU4-LG1-MB)
Energy Saving + Preventive Maintenance
(For CC-Link IE Field Network Basic communication, the option CC-Link IE Field Network Basic Communication Unit (Model:EMU4-CM-CIFB) is required.)
CC-Link IE Field Basic｜Remote｜Miscellaneous
CC-Link｜Master｜PLC
MELSEC iQ-F Series CC-Link system master/intelligent device module FX5-CCL-MS
Master/intelligent device station for MELSEC iQ-F Series.
The CC-Link connects the CPUs of MELSEC iQ-F series PLCs within a single network.
FCU8-EX561 CC-Link Interface Unit for MITSUBISHI CNC M800W/M800S/M80 series
Functioning as CC-Link’s master and local stations.
CC-Link IE Field Network Simple Motion Board MR-EM340GF
Motion control on PC Environment with CC-Link IE Field Network
MELSEC iQ-R Series CC-Link Master/Local Module RJ61BT11
Master/local module for the MELSEC iQ-R Series.
The CC-Link connects the CPUs of various MELSEC series PLCs within a single network.
CC-Link master block FX3U-16CCL-M
This is a special function block for FX3G/FX3GC/FX3U/FX3UC PLCs.
Up to 8 remote I/O stations and 8 remote device stations / inteligent device stations can be connected to the master station.
（For an FX3G as master, maximum 4 remote I/O stations）
MELSEC-L Series CC-Link Master/Local Station LJ61BT11
Master/local station for MELSEC-L Series.
The CC-Link connects the CPUs of various MELSEC series PLCs within a single network.
MELSEC-L Series CC-Link Master/Local Function Embedded CPU L26CPU-BT/L26CPU-PBT
The MELSEC-L series CPU has a built-in CC-Link function.
The CC-Link connects the CPUs of various MELSEC series PLCs within a single network.
MELSEC-Q Series CC-Link Master/Local Module QJ61BT11N
It is a master/local module for MELSEC-Q Series PLC.
The CC-Link connects the CPUs of various MELSEC Series PLCs within a single network.
CC-Link Master Block for FX2N-16CCL-M Micro PLCs
A CC-Link system can be constructed with an FX PLC.
CC-Link｜Master｜PC・others
FCU7-HN746 CC-Link Interface Unit for MITSUBISHI CNC M700VS/M70V series
Functioning as CC-Link’s master and local stations
IU2-1ECLM-100 CC-Link Communication Board
This is the Mitsubishi Intelligent Inspection Unit MELQIC IU2 Series CC-Link Communication Board.
Master/Local Station Board for CNC C64 for Machining Lines
As a master or local station for the MELSEC CC-Link, the CNC MELDAS C64 for machining lines can be connected directly to a network
CC-Link Network Interface Board Q80BD-J61BT11N/Q81BD-J61BT11
This is a CC-Link Ver.2 Interface Board.
It enables data communications between the computer and programmable controllers.
CC-Link｜Master｜Products built into devices
CC-Link Ver.2 Embedded Interface Board
Sub-circuit board compatible with CC-Link Ver.2.
CC-Link｜Device｜PLC
CC-Link Interface Block for FX2N-32CCL Micro PLCs
This interface block is designed to connect an FX PLC to the CC-Link.
CC-Link interface special block FX3U-64CCL for FX3U series
An interface block for connecting Mitsubishi Electric Corporation's Micro Sequencer (or PLC) "FX3U series" to the CC-Link (V.2 compatible)
CC-Link｜Device｜Digital I/O
Remote I/O Module Waterproof Connector Type AJ65FBTA□-□
Ensures safety even in an environment using water.
Remote I/O Module with Diagnostic Functions Spring Clamp Terminal Block Push-in Type AJ65ABTP3-16D/AJ65ABTP3-16DE
Easy maintenance with diagnostic function.
Remote I/O Module A2C Form Terminal Block Type AJ65DBTB□-□
Existing A2CCPU and MELSECNET/MINI-S3 I/O modules can be replaced with CC-Link modules.
Safety Relay Module QS90SR2SN-CC/QS90SR2SP-CC
You can use these modules without any programming. Safety certification at the highest level is achieved.
Remote I/O Module 40-pin (FCN) Connector Type AJ65SBTCF□-□/AJ65VBTCF□-□
The 40-pin connector can significantly reduce wiring time.
Remote I/O Module One-touch Connector Type AJ65SBTC□-□/AJ65VBTCU□-□
A separate wire crimping connection system can significantly reduce wiring time.
Remote I/O Module Screw Terminal Block Type AJ65SBTB□-□
A self-up screw ensures labor saving in wiring work.
Remote I/O Module Spring Clamp Terminal Block Type AJ65VBTS□-□
Reduces wiring time since screw tightening and retightening are unnecessary.
Remote I/O Module Sensor Connector Type (e-CON) AJ65VBTCE□-□
Industry standard e-CON
CC-Link｜Device｜Analog I/O
Thermocouple Input Module Screw Terminal Block Type AJ65SBT2B-64TD
4-channel Type: Now in the Thermocouple Input Module Lineup
Analog Input Module Screw Terminal Block Type AJ65SBT2B-64AD
The high accuracy, high resolution, high-speed conversion CC-Link 4CH analog input module saves engineering time.
Analog Output Module Screw Terminal Block Type AJ65SBT-62DA
The output range can be switched for each channel.
Analog Input Module Screw Terminal Block Type AJ65SBT-64AD
The input range can be switched for each channel.
Analog Output Module One-touch Connector Type AJ65VBTCU-68DAVN
The output range can be switched for each channel.
Analog Input Module One-touch Connector Type AJ65VBTCU-68ADVN / AJ65VBTCU-68ADIN
The input range can be switched for each channel.
RTD Input Module Screw/2-piece Terminal Block Type AJ65SBT2B-64RD3
The RTD input module saves engineering time and space.
Analog Output Module Screw Terminal Block Type AJ65SBT2B-64DA
The high-accuracy, high-resolution CC-Link 4 CH analog output module saves engineering time and space.
CC-Link｜Device｜HMI
Mitsubishi Graphic Operation Terminal CC-Link interface module for Handy GOT: GT11HS-CCL, GT11H-CCL
Connect the handy GOT with Q series PLC via CC-Link.
The removable handy GOT can be removed from the GT11H(S)-CCL and connected to a different GT11HS-CCL, or connected simultaneously to operate a machine.
GT15-J61BT13 Communication Modules for HMI (GOT1000)
Corresponds to intelligent device station module CC-Link Ver. 2
CC-Link｜Device｜Transmission Devices
Space Optical Repeater Modules AJ65BT-RPI-10A/AJ65BT-RPI-10B
Space transmission is realized by infrared rays.
CC-Link｜Device｜Gateway
CC-Link - CC-Link/LT Bridge Module AJ65SBT-CLB
Includes the bridge function to establish a connection between CCLink and CC-Link/LT.
CC-Link-Anywire ASLINK Bridge Module NZ2AW1C2AL
This is the bridge module used for the connection between Anywire ASLINK and CC-Link.
CC-Link－AnyWire DB A20 Bridge Module NZ2AW1C2D2
This is a bridge module used for the connection between AnyWire DB A20 having the full-duplex transmission mode and CC-Link Ver. 2.00.
CC-Link－AnyWire Bitty Bridge Module NZ2AW1C1BY
This is the bridge module used for the connection between AnyWire Bitty having the DC transmission line system and CC-Link.
CC-Link｜Device｜Inverter・Servo systems
MITSUBISHI Inverter FR-F700P Seriese
Energy-saving premium inverter for fans and pumps
(For CC-Link communication, the option FR-A7NC is required.)
FREQROL-E520-KN (3-phase, 200 V Power Model), FREQROL-E540 (3-phase, 400 V Power Model) General-purpose Inverter
An enriched line of compact, powerful inverters.
MITSUBISHI Inverter FR-V500 Seriese
Vector inverter combining high performance and ease of use
(For CC-Link communication, the option FR-A5NC is required.)
MITSUBISHI Sensorless Servo FR-E700EX , MM-GKR
Highly accurate operation achieved without using an encoder.
Sensorless servo system is a combination of a dedicated drive unit and a dedicated sensorless PM motor (magnet motor).
(For CC-Link communication, the option FR-A7NC E kit is required.)
FR-E700-SC, MITSUBISHI FR-E700 Series Inverter Supporting Safety Stop Function
Simple, powerful, and compact inverter supporting the safety stop function
(For CC-Link communication, the options FR-A7NC and FR-A7NC E kit cover SC are required.)
FR-E700-NC, MITSUBISHI FR-E700 Series Inverter Supporting CC-Link Communication
Built-in CC-Link communication function!
All-rounder with compact body is now even easier to use!
FREQROL-F700 Series General-purpose inverter
The energy saving effect is obvious
Energy saving inverter
FREQROL-C500 Series General-purpose Inverter
A long-desired inverter incorporating PLC functions has arrived.
FREQROL-A700 Series General-purpose inverter
Highest level in your hand
High-performance/high-function inverter
MITSUBISHI Inverter FR-E700 Series
Simple, powerful, and compact inverter
(For CC-Link communication, the option FR-A7NC E kit is required.)
MITSUBISHI Inverter FR-F700P Seriese(FR-A7NC)
Energy-saving premium inverter for fans and pumps
(For CC-Link communication, the option FR-A7NC is required.)
MITSUBISHI Inverter FR-A701 Series
Inverter with built-in power regeneration function
(For CC-Link communication, the option FR-A7NC is required.)
MITSUBISHI Inverter FR-A700 Series(FR-A7NC)
Advanced functionality and high-performance inverter
(For CC-Link communication, the option FR-A7NC is required.)
MITSUBISHI Inverter FR-A800 Series(FR-A8NC)
High performance and high quality new inverter of the highest level
(For CC-Link communication, the option FR-A8NC is required.)
CC-Link｜Device｜Robot
RP, RV-A, RH-A, RV-T Robot for Industrial Use
With upgraded network functions, this robot offers diversified systems.
CC-Link｜Device｜Barcode・ID
RS-232 Interface Module AJ65BT-R2N
Non procedural data communication is available using an RS-232 cable.
CC-Link｜Device｜Power reception and distribution device
Energy Measuring Unit EcoMonitorLight (Model:EMU4-BD1A-MB/EMU4-HD1A-MB)
Simple & Easier. Providing Energy Visualization.
(For CC-Link communication, the option CC-Link Communication Unit (Model:EMU4-CM-C) is required.)
Energy Measuring Unit EcoMonitorPlus (Model:EMU4-BM1-MB/EMU4-HM1-MB/EMU4-LG1-MB)
Energy Saving + Preventive Maintenance
(For CC-Link communication, the option CC-Link Communication Unit (Model:EMU4-CM-C) is required.)
Electronic Multi-Measuring Instrument ME96SSRA-MB,ME96SSHA-MB
With simple operating functions, ME96SSRA-MB and ME96SSHA-MB are the best support your measuring and monitoring systems.
Energy Measuring Unit EcoMonitorLight (Model:EMU4-BD1-MB/EMU4-HD1-MB)
Simple & Easier. Providing Energy Visualization.
(For CC-Link communication, the option CC-Link Communication Unit (Model:EMU4-CM-C) is required.)
ELECTRONIC MULTI-MEASURING INSTRUMENT ME110Super-S series
Easy-to-use and easy-to-read display functions
ENERGY MEASURING UNIT EMU3-DP1-C
In addition to detailed energy measurement, the EMU3 Series provides basic unit management and production facility current leakage monitoring/status management with its measuring leakage current function and contact input/output function.
Multi-Measuring Instrument with Leakage Current Measuring Function ME110NSFL-C
Multi-Measuring Instrument with Leakage Current Measuring Function
This low-voltage measuring instrument can measure leakage current (Io, Ior measurement), current, current demand, votage, active power, and active energy.
MITSUBISHI ELECTRONIC MULTI-MEASURING INSTRUMENT ME96NSR
Compact & Flexible & Operation Ease
MITSUBISHI ENERGY MEASURING UNIT EMU3
The pulse input function and leakage current monitoring function is added to this units.
With built-in CT and ZCT, easy installation and wiring is possible.
LG-5F/LG-10F Mitsubishi Ground Fault Cluster Monitor unit
From “alarm monitoring” to “visible, continuous monitoring”. CC-Link data transmission enables the host monitor system to monitor continuously. This provides the tendency of leakage currents for analyzing abnormalities and facilitating preventive maintenance of facilities.
ME110NSR-C ELECTRONIC MULTI-MEASURING INSTRUMENT New-S Series
Mitsubishi Electronic Multi-measuring instrument New-S series features high performance and crystal clear display, supporting your measuring and monitoring systems.
ME110SR-C Mitsubishi Electronic Type Indicator S Series
Incorporating the newly developed ASIC for measurement, the indicator has been significantly improved in measuring elements, output, visibility/operability, and functionality.
MELPRO-D Series Digital Type Protective Relay for High Voltage and Special High Voltage
This relay, which is compatible with advanced communication networks, strongly assists the automation of power distribution.
Mitsubishi Energy Measuring Module EcoMonitorPro
Energy-saving assisting units have entered the second generation!
The EcoMonitor series has evolved by "packaging and adding flexibility"!
EMU-C7P4-6-A Mitsubishi Multiple-circuit Power Measuring Module EcoMonitor2
It covers a wide range of applications, from on-site energy saving improvement and analysis to centralized monitoring through a network!
A single module is capable of measuring the current, voltage, power, and electric energy of up to six circuits (three single-phase wires/three three-phase wires).
Mitsubishi MDU Circuit Breaker with Measurement/Display unit (MDU)
A circuit breaker and a measurement/display unit are integrated!
With built-in VT and CT, the circuit breaker requires less space and assists in reducing work and saving energy.
CC-Link｜Device｜Products built into devices
Built-in Type I/O Module AJ65MBTL1N-□
An ultra small type mounted directly on a PC board, this module helps flexible, efficient design.
MFP1N/MFP2N/MFP3N Communication LSI Dedicated to CC-Link
This LSI makes the development of CC-Link-compatible units easy.
CC-Link｜Device｜Miscellaneous
MELSEC-WS Series CC-Link Interface Module WS0-GCC100202
Safety control can be easily added to existing MELSEC PLCs.
High-speed Counter Module Screw Terminal Block Type AJ65BT-D62/AJ65BT-D62D
Enables to count high-speed pulses accurately.
CC-Link｜Peripheral devices｜Peripheral software
GX Works2 SW1DNC-GXW2-E
Programmable Controller Engineering Software
The Next Generation in Industrial Programming
MELSEC Programming Software GX Developer SW□D5C-GPPW
Programming software for the MELSEC-Q Series
CC-Link｜Peripheral devices｜Wiring products
Repeater Hub Module Spring Clamp Terminal Block Type AJ65BTS-RPH
Star wiring, extension of bus lines, spring clamp terminal block type
Repeater Hub Module Thin Waterproof Type AJ65FBTA-RPH
Water proof construction enables outside installation
Optical Repeater Module AJ65SBT-RPS/AJ65SBT-PRG
The module can extend the transmission distance of CC-Link systems.
Repeater T-branch Module AJ65SBT-RPT
T-branch wiring can be made on a CC-Link system.
CC-Link Safety｜Master｜PLC
CC-Link Safety Master Module QS0J61BT12
Newly available is a CC-Link Safety system master module compatible with the MELSEC-QS Series.
CC-Link Safety｜Device｜Digital I/O
CC-Link Safety Remote I/O Module Screw Terminal Block Type QS0J65BTB2-12DT
The system of EN954-1 category 3 or category 4 can be configured according to the combination of wiring and parameters. Self-diagnostics can detect failures inside the module to turn off outputs
CC-Link Safety Remote I/O Module Spring Clamp Terminal Block Type QS0J65BTS2-8D
The system of EN954-1 category 3 or category 4 can be configured according to the combination of wiring and parameters. Dark tests (diagnosis of stuck failure of junctions) can diagnose a failure, covering external safety devices
CC-Link Safety Remote I/O Module QS0J65BTS2-4T
The system of EN954-1 category 3 or category 4 can be configured according to the combination of wiring and parameters. Dark tests (diagnosis of stuck failure of junctions) can diagnose a failure, covering external safety devices
CC-Link/LT｜Master｜PLC
MELSEC-L Series CC-Link/LT Master Module LJ61CL2
It is a CC-Link/LT master module for MELSEC-L Series PLC.
MELSEC-Q Series CC-Link/LT Master Module QJ61CL12
Up to 64 remote stations can be connected to a single master station
Model FX3UC-32MT-LT（-2） micro PLC
Equipped with a master function for CC-Link/LT as a standard item, this high-speed, high-performance PLC is far beyond the established image of micro PLCs.
Model FX2N-64CL-M Master Module
This module transforms an FX PLC into the master station for a CC-Link/LT system.
CC-Link/LT｜Device｜Digital I/O
Remote I/O Unit Spring Clamp Terminal Block Type CL□-□S□
The structure of the 2-piece terminal block enables easy maintenance.
Remote I/O Module Cable Type CL□-□D□
The module is one of the smallest units in its industry class.
Remote I/O Module MIL Connector Type CL□-□M□
The module is one of the smallest modules in its industry class
Remote I/O Module Sensor Connector Type (e-CON) CL□-□C□
The module is one of the smallest modules in its industry class
Remote I/O Module Screw Terminal Block Type CL□-□B□
The module is one of the smallest units in the class in the industry
CC-Link/LT｜Device｜Analog I/O
Analog Output Module Screw Terminal Block Type CL2DA2-B
Smaller than CC-Link D/A conversion modules
Analog Input Module Screw Terminal Block Type CL2AD4-B
Smaller than CC-Link A/D conversion modules
CC-Link/LT｜Device｜Products built into devices
Communication LSI Dedicated to CC-Link/LT
CC-Link/LT compatible devices can be developed easily without worrying about the communication protocol.
CC-Link/LT｜Peripheral devices｜Power supply
SLMP｜Client/Server｜Miscellaneous
MITSUBISHI DATA LOGGING ANALYZER MELQIC UIU2 Series IU2-3M10/IU2-3M10L
The MELQIC IU2 Series integrates data sampling/analysis/evaluation/saving into a single unit.
Realize product quality improvement with this all-in-one unit.
- CC-Link Partner Association (CLPA)
Members Site 