1. ホーム
  2. 製品情報
  3. 会社名で探す
  4. MITSUBISHI ELECTRIC CORPORATION
  5. Remote I/O Modules Sensor Connector (e-CON) Type NZ2GNCE3-32

製品情報

CC-Link partner product information

CC-Link IE TSN|Slave|Digital I/O

MITSUBISHI ELECTRIC CORPORATION

Remote I/O Modules Sensor Connector (e-CON) Type NZ2GNCE3-32

Block type remote I/O modules for CC-Link IE TSN. They are mainly used when installation requires them to be close to connected I/Os to save on wiring.

Feature

  • Easily set parameters using only hardware switches
  • Detection of low power supply voltage
  • Input module conforms to IEC61131-2 Type3 (digital input standard operation range), supporting various sensors
  • Switch to CC-Link IE Field Network slave station mode
  • Input/output timing can be synchronized with inter-modular synchronization cycle, enabling highly accurate control of the system
  • For the CSP+ files, please contact your local Mitsubishi Electric office or representative
  • NZ2GNCE3-32D: DC input
    NZ2GNCE3-32DT: I/O combined
Station type Remote station
Authentication Class B
Communication speed 1Gbps,100Mbps
Function
External dimensions 58 (H) × 200 (W) × 50.1 (D) [mm]
Mass 0.25 kg
Standard Price