Search by Category
- Search by Category
- Search by Company
- Search by specifying conditions
- CC-Link
- CC-Link IE
TSN - CC-Link IE
Control - CC-Link IE
Field - CC-Link IE
Safety - CC-Link IE
Field Basic - SLMP
Device station｜Load cell・IndicatorReturn to List
A&D Company, Limited
AD‑4411‑CCL Weighing Indicator with CC‑Link
The AD‑4411‑CCL is a weighing indicator equipped with CC‑Link.
It connects load cell signals to a host controller via CC‑Link.
This enables reduced wiring, easy system expansion, and lower system and software development efforts in plant and factory industrial control systems.
AD-4430C DIN-rail weighing module with CC-Link
The AD-4430C is a weighing module with a powerful vibration elimination filter (HPDF), making it suitable for use in environments with high levels of vibration.
It achieves high-speed sampling at 1,000 times per second. Additionally, the AD-4430C includes features such as sequential weighing, set point, averaging hold, comparator function, non-linear correction using higher-order formulas, near-zero detection, zero tracking, and gravity acceleration correction.
Multiple-function weighing indicator AD-4402
AD-4402 is a multi-function weighing indicator. Despite its compact body, it features a large display and extensive weighing functions. It supports various plant equipment through CC-Link and other input/output interfaces.
KYOWA ELECTRONIC INSTRUMENTS CO., LTD.
Instrumentation Amplifier WP-120A
WP-120A is a waveform display type instrumentation amplifier equipped with a 4.3-inch touch panel and capable of monitoring two inputs, load and displacement.
The outputs of the load cell and displacement sensor can be measured simultaneously to determine if a correct press fit has been made.
Instrumentation Amplifier WGA-910A
WGA-910A is instrumentaition amplifier with touch front panel. It is possible to monitor loading stress and other stresses with waveform. Loading signal with physical value can be checked easily on touch panel indication.
Instrumentation Amplifier WGA-680A
High-spead sampling
The WGA-680A series is compact amplifiers enabling direct reading of physical quantities such as load through high-speed sampling of signals from a strain gage transducer.
LAUMAS ELETTRONICA SRL
TLB4 CC-LINK
Weight transmitter/indicator with six-digit red LED display (8 mm height). Space saving compact design. Four buttons for the system calibration. Six indicator led. 4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization). Complete access to the instrument configuration parameters and functions by filedbus interface. Base weighing and Batching load process control functions.
TLM8 CC-LINK
Weight transmitter with backlit graphic LCD display. Five-key keypad for the system calibration. The TLM8 offers the benefits and performance of an advanced digital weighing system even using analog load cells. 8 independent reading channels for load cells. Digital equalization. Automatic diagnostics. Complete access to the instrument configuration parameters and functions by filedbus interface. Base weighing and Batching load process control functions.
METTLER TOLEDO
IND131/331 Industrial Scale Terminals
IND331 as a process terminal providing strong weighing performance in difficult process weighing conditions.
Minebea Intec GmbH
Process Controller Maxxis5 (PR5900)
The Maxxis 5 combines accuracy, connectivity and functionality in a freely programmable weight controller for a wide range of applications. From simple weighing tasks to single-component filling through to complex
dosing, Maxxis 5 effortlessly and reliably controls all modern automation processes.
CC-link connection is possible by installing option PR1721/55.
Process Controller Maxxis4 (PR5900)
The Maxxis 4 combines accuracy, connectivity and functionality in a freely programmable weight controller for a wide range of applications. From simple weighing tasks to single-component filling through to complex
dosing, Maxxis 4 effortlessly and reliably controls all modern automation processes.
CC-link connection is possible by installing option PR1721/65.
Minebea Mitsumi Inc.
CSD-903B-73 Digital Indicator for Load Cells
New basic model including all MinebeaMitsumi's precious measurement knowhow. Digital indicator, most suitable for weighing systems.
CSD-912B-73 Graphic Digital Indicator for Load Cells
This graphic digital indicator CSD-912B for the load cells can be widely applied from an advanced sequence control such as the hopper scales, the packer scales, etc., to a simple measurement such as the platform scales, etc.
Digital peak holder CSD-709-73
It is a digital peak holder with high speed sampling 4000 times / s.
CSD-892B-73 Weight Conversion Module
High performance and Palmtop size Weight Conversion Module.
Fit and Smart model in FA systems.
Digital Indicator for Load Cells CSD-815B-73
This digital indicator CSD-815B for load sell is low-priced,light weight and compact size.
CSD-891B-73 Digital Indicator for Load Cells
This digital indicator for load cells can be housed in a panel.
Technical & Try CO., LTD
Unipulse Corporation
FC1000
FC1000 is the weighing indicator with various features such as the white LCD main and sub display, IP 65 dust and drip protection, accumulation function, data recording on SD Card, and high-speed A/D conversion rate of 1.2kHz.
Digital Indicator FS2000
The best solution for OK/NOK judgment of press fitting and caulking application !!
High responsiveness of 5kHz to fully utilize the performance of Super Cell !!
A fluctuation of force is shown as a waveform
Global standard model High performance design Weighing indicator F701-S
High grade unit that pursues high specifications and functions
Graphic Display Type Digital Indicator F377A
The F377 is a digital indicator for voltage and current output type sensor.
This product contributes to the quality control of production lines by its powerful hold and OK/NG judgment functions.
Graphic Display Type Weighing Controller F600AT
This is a basic type weighing controller featuring select functions necessary for metering.
Weighing Controller for Checker Scale F805A-CK
A weighing controller developed for checker scale
Graphic Display Type Digital Indicator F372A
This is digital indicator for strain gauge type sensor for measuring and controlling press fitting, load, torque, etc.
Weighing Controller for Constant Feed Weigher F805A-CF
A weighing controller developed for weight supply and loss-in-weight.
All-in-one Type Weighing Controller F805A
A weighing controller combining a variety of functions developed exclusively for metering systems and ever-higher user-friendliness.
All-in-one Type Weighing Controller F800
A weighing controller with a wide range of applications and compatible with any metering system requiring advanced know-how.
Dynamic Force Processor F381A
On-the-spot problem analysis and setting while observing fluctuation of "Force"
Boundless control on "Force" such as Pressure, Load and Torque!
Weighing Controller F156 for CC-Link
Equipped with a CC-Link interface as a standard item, this weighing controller is best suited for use within control panels, etc.
Accumulation Value Display Weighing Controller F701-C
General-purpose type weighing controller equipped with sequence weighing function corresponding to high accuracy measurement control.
Weighing Controller F160 for CC-Link
Control panel mounting type Weighing Controller with CC-Link interface, compact size and display.
Valcom Co.,LTD.
High-speed strain gauge panel meter VGM4
Compact,high-performance and Good good performance.
high-speed sampling of 4000 samples per second(Hold:20000 sanmples per second)
Weighing Indicator Designed for CC-Link VWM8C
Can be connected to CC-Link directly.
High-efficiency digital filter adopted!
Outstanding ability in locations with frequent vibrations.
YAMATO SCALE CO., LTD.
Load Cell Digital Indicator/Controller EDI-2000
This is a general-purpose indicator/controller with a wide range of applications, including hopper scales (blending scales).
EDI-800/910 Indicator/Controller for Load Cells
This is a general-purpose indicator/controller with a wide range of applications, including hopper scales (blending scales).
ＴＥＡC Corporation
Load Cell Signal Conditioner TD-SC1(CCL)
TD-SC1 is a signal conditioner that converts minute electrical signals from load cells into outputs that meet the specifications of the controller.
This product is mainly used for pressure control of load cells such as semiconductor manufacturing equipment, industrial robots, and FA equipment.
There are four models, D/A output, RS-485, CC-Link, and EtherNet/IP, which can be selected according to the application.
TRANSDUCER DIGITAL INDICATOR TD-9000T(CCL)
Equipped with 4.3 inch touch panel for TEDS compatible digital indicator.
Real-time measurement with 25K sampling and versatile multi-zone measurement.
Supports 2 inputs of load and displacement (displacement supports 2 types of voltage and pulse, and various sensors can be used)
Digital Transducer Indicator TD-700T(CCL)
Color LCD equipped High Speed and High Cost Performance Digital Transducer Indicator