This is a CC-Link system digital I/O. This digital I/O has a reduced wiring function, allowing to mount various types of I/O terminal on needed place as needed. With a large variety of compatible I/O terminals, a maximum of 512 points for I/O are supported on up to 128 I/O terminals, which have minimal point dispersion.
Station Type : Device Station
Number of Station occupied : 1~4 Station (1~8 Extention) / Static 4 Station 1 Extention
CC-Link Version : Version 2.00
Communication Speed : 156kbps/625kbps/2.5Mbps/5Mbps/10Mbps
CC-Link - IO-Link - Module with 8 M12 Ports. 4 IO-Link-Ports and max. 16 digital inputs/outputs (PNP), free configurable. Distributed /I/O box, Waterproof, Field mountable, IP67
RL64 transmits 64+32 bi-directional signals between a movable side and a fixed side inductively and connects them to CC-Link.
INPUT 48 , OUTPUT 16 , ALALOG INPUT16 , REMOTE DEVICE
Consolidates fault/status indication for 8 circuits
CC-Link Compatible 110 Square Annunciator
Contributes to space saving and wiring saving in power distribution panels
Makes it possible to directly connect the Laser Sensor, Digital Contact Sensor, and Digital Flow Sensor to CC-Link, which dramatically reduces wiring and enhances usability due to remote operations.
Makes it possible to directly connect the NEO Series Digital Fiberoptic Sensor and Digiatl Laser Sensor to CC-Link, which dramatically reduces wiring and enhances usability due to remote operations.
An all-in type module equipped with three stages of input constant (0.2 ms/1.5 ms/10 ms) and input voltage switching (24 V/5 V or 24 V/12 V).
Discrete I/O Module for CC-Link (DI32, DO32, DI16/DO16)
Ensures safety even in an environment using water.
Existing A2CCPU and MELSECNET/MINI-S3 I/O modules can be replaced with CC-Link modules.
You can use these modules without any programming. Safety certification at the highest level is achieved.
The 40-pin connector can significantly reduce wiring time.
A separate wire crimping connection system can significantly reduce wiring time.
A self-up screw ensures labor saving in wiring work.
Reduces wiring time since screw tightening and retightening are unnecessary.
sensorVibrationsensorIoT Solutions for Manufacturing by
Connecting Equipment and Sensors or Other Devices through Network
Pre-assembled Push Button Station on CC-Link
TBDCC-444P-88U-G (CC-Link IO) modules provide a reliable solution for connecting industrial controllers to I/O devices in harsh duty environments. Contained in an IP67 rated housing, Brad I/O modules can be machine mounted and are able to withstand areas where liquids, dust or vibration may be present. This makes them ideally suited for many applications including material handling and automated assembly.
TBDCC-844P-844-G (CC-Link IO) modules provide a reliable solution for connecting industrial controllers to I/O devices in harsh duty environments. Contained in an IP67 rated housing, Brad I/O modules can be machine mounted and are able to withstand areas where liquids, dust or vibration may be present. This makes them ideally suited for many applications including material handling and automated assembly.
TBDCC-480P-88U (CC-Link IO) modules provide a reliable solution for connecting industrial controllers to I/O devices in harsh duty environments. Contained in an IP67 rated housing, Brad I/O modules can be machine mounted and are able to withstand areas where liquids, dust or vibration may be present. This makes them ideally suited for many applications including material handling and automated assembly.
TBDCC-880P-844 (CC-Link IO) modules provide a reliable solution for connecting industrial controllers to I/O devices in harsh duty environments. Contained in an IP67 rated housing, Brad I/O modules can be machine mounted and are able to withstand areas where liquids, dust or vibration may be present. This makes them ideally suited for many applications including material handling and automated assembly.
デジタル変位センサ（HG-Sシリーズ）をCC-Linkに直結。高精度測定値をダイレクトに転送可能。
Digital sensors are directly connected to CC-Link. Display value and set value of digital sensors can be indicated and set up at PC and/ or touch panel.
Digital sensors can be directly connected to CC-Link. Application time is reduced, and wires and spaces are saved.
Another fieldbus module for connection to CC-Link is available for the configurable control system PNOZmulti 2.The inputs and outputs on the fieldbus module are configured in the software tool PNOZmulti Configurator; it’s so easy it’s child’s play.
You use the fieldbus module to read diagnostic data and to set virtual inputs and outputs for automation functions. If PNOZmulti needs to be connected to a different fieldbus
system, that’s easy to do without any program changes.
CC-Link Remote I/O Terminal
Santest IRD series CC-Link communication module
Use in combination with the modules such as the linear sensor module or oil pressure servo module.
Spider67 is a new and revolutionary expandable I/O system. The gateway module supports standard bus protocols. Varius sub-modules are available. The simple and easy installation makes Spider67 especially suitable for applications in roufh environments.
Fieldbus I/O module CC-Link,16 Digital Inputs,M12 A code connection
I can operate it as CC-link remote I/O by attaching it to a relay terminal and the teminal stand of the Yoshida teminal Blocks.
