The patch cord assembly is made of duplex zip 2.0 mm multimode 50 micron, OM2, fiber cable connectorized with LC Duplex connectors at both ends. The insertion loss is specified at a maximum of 0.3 dB
BELDEN patch cord assembly is made of Duplex Zipcord 2.0 mm, Multimode 50 micron, OM3, Fiber cable connectorized with LC Duplex connectors at both ends. The insertion loss is specified at a maximum of 0.25 dB for Individual Connectors on each Side.
BELDEN Armoured patch cord assembly is made of Duplex Zipcord 3.0 mm, Multimode 50 micron, OM3, Fiber cable connectorized with LC Duplex connectors at both ends. The insertion loss is specified at a maximum of 0.25 dB for Individual Connectors on each Side.
It is a fiber optic adapter that can extend the optical fiber cable (DLC connector) for CC-Link IE Controller network.
It is an optical fiber cable of the connector processing finished for CC-Link IE Controller network.
Adopting multi-mode GI optical fiber of core diameter 50μm and cladding diameter 125μm to optical cord.
CC-Link IE Controller Network Compatible Optical Fiber Cable(trunk line or external wiring)
CC-Link IE Controller Network Compatible Optical Fiber Cable(Inside panel)
CC-Link IE Controller Network Compatible Armored Fiber Patch Cord, LC-LC,
OM3 50/125 (PVC/LSZH)
FL-MT0303Dx-XXX(x: Jacket Material, XXX: Length)
CC-Link IE Control Compatible high strength plastic Optical Fiber Cable
(With our original Protective holder)
This optical fiber cable is Listed by Underwriters Laboratories Inc. and high flame retardant.
This cable is lasting on movable condition, and passed 10 million times bending test. It is possible to use this cable with cable bears and curtain rails.
CC-Link IE Controller Network Compatible Optical Fiber Cable
(With our original Protective holder)
Zip cord usable for device wiring
Tough optical fiber cable durable against lateral pressure
CC-Link IE Control Network Compatible Optical Fiber Cable
