Home > Development Support > Conformance test > CC-Link Conformance Test Regulation

CC-Link Conformance Test Regulation

CC-Link Partner Association (CLPA) prescribes for the CC-Link Conformance Test regarding partners' products as follows.

Application Sphere

  1. This regulation is applied to materials/ devices prepared by partner companies, test items, reports on test results, and issues of certificates of the Conformance Tests prescribed by the "CLPA Membership Agreement".
  2. The Conformance Test is the evaluation test to confirm whether partners' products are compatible to CC-Link or not. Please refer to the "CLPA Membership Agreement", "Standards of Conformance Statement". This test does not guarantee the qualities of their products.
  3. Partners should pay for the cost. Please refer to the "CLPA Membership Agreement".

Materials and devices to be submitted by partners
Submission
Details
Remarks

Materials

 Conformance Test Application form Original of application form
filled in properly and signed 		Refer to the attached form
Results on the evaluation test according to the
test items
● Results on the each
conformance test items
*1 (test items done
by partners)
● Results on the each specified
test item
Refer to the divided parts written at 3
A set of programs for the test
● Sequence programs
● Specified programs
Sequence programs should be submitted in FD
A set of instructions
● Operation manuals of products
● How to deal with troubles
Mainly for the communication dealings
Devices Products ●Two sets For the test
Devices to connect with products
● One set (In put/ Out put devices
which must be connected
in the test)
In case they are indispensable in the communication
(Can be discussed)

Please send submissions to 1 or 2 (CLPA informs you which one you send)

1. Mitsubishi Electric Engineering Company Limited Industrial System Division,
　Quality Assurance Center, Evaluation・EMC, Conformance Test Section

　Address:
　139 Shimoyashiki, Shimoyashiki-Cho, Kasugai city,
　Aichi prefecture 486-0906

　Tel:
　+81-568-36-2094

2. CC-Link Partner Association
　Address:
　6F Meiji Yasuda Seimei Ozone Bldg., 3-15-58, Ozone, Kita-ku,
　Nagoya 462-0825, Japan

　Tel:
　+81-52-919-1588

Test items and test divisions

  1. Noise tests
  2. Hardware tests
  3. Software tests
  4. Combination tests
  5. Interoperability tests
  6. Aging tests

Conformance Test Specification

The test method and judgment standard should be based on the CC-Link Conformance Test Specification BAP-89999E. Please ask CLPA for a copy of this manual in conducting of conformance test.

Conformance Test Result and Certificate

  1. As for the conformance test result, "Conformance Test report" should be sent to partners.
  2. The improved conformance test result should be added on the repot. CLPA should discuss the result with partners separately.
  3. The conformance test certificate should be issued on condition that the product passes all test items.

Others

Partners should inform CLPA if their CC-Link compatible products were modified (modifications of print-circuit board, attached parts). The procedure should be discussed between partners and CLPA.

Page top