CC-Link | Slave | Digital I/O
MITSUBISHI ELECTRIC CORPORATION
QS90SR2SN-CC/QS90SR2SP-CC Safety Relay Module
You can use these modules without any programming.
Safety certification at the highest level is achieved.
 |
 |
Features
- You only need wiring to construct a safety
circuit. No programming or setting is necessary.
- Connect a safety relay module for expansion,
so that you can use 4 safety inputs and safety
outputs at the maximum. These modules are optimal
for a small-scale safety control.
- The modules are authorized by certifications
at the highest safety level (EN954-1/ISO13849-1
category 4/performance level E).
- If a trouble should occur in the module, the
fail-safe function stops operation safely.
- Because a spring clamp terminal block is adopted,
you do not need to fasten any screw. Your wiring
workload is considerably reduced.
|
Specifications
| Station type |
Remote I/O station |
| Number of stations occupied |
1 station |
| CC-Link version |
Ver.2 |
| External dimensions |
45(W)×112(H)×115.9(D) mm |
| Weight |
0.37 kg |
|
